Description
The CA series by Crest Audio provides tremendous value in proven amplifier technology. CAs form the backbone of discriminating rental systems and high-power club installations worldwide. Auditoriums, churches, regional tour sound companies and mobile DJs are all ideal candidates for the CA Series’ combination of value and sonic quality.
Features
- 8 Ohm Stereo – 1000 W
- 4 Ohm Stereo – 1800 W
- 2 Ohm Stereo – 2500 W
- 8 Ohm Bridged – 3600 W
- 4 Ohm Bridged – 5000 W
- Legendary over-built power supply
- Toroidal power transformer
- Latest generation of high-speed, wide-bandwidth output devices
- Twin-tunnel cooling with back-to-front air flow
- Dual, rear-mounted, continuously variable-speed fans
- Balanced male and female XLR inputs with switch-configurable XLR polarity and sensitivity selection
- Speakon or five-way binding post output connectors (market dependent)
- Stereo, parallel, bridged-mono mode selector switch
- Ground-lift switch
- Front panel circuit-breaker switch
- Recessed, stepped attenuators
- SIGNAL present/active, PROTECT, and ACL LED’s
- Modular construction
- Powder-coated steel chassis
- Five-year warranty (3-Year Warranty with 2 additional years if Registration Card is sent to Crest Audio)
CA 18 5000W Power Amplifier Specifications:
- Model: CA 18
- 8 Ohms Stereo Power: 1000W 1kHz, 0.03% THD+N; 950W 20Hz-20kHz, 0.1% THD+N
- 4 Ohms Stereo Power: 1800W 1kHz, 0.03% THD+N; 1700W 20Hz-20kHz, 0.1% THD+N
- 2 Ohms Stereo Power: 2500W 1kHz, 0.03% THD+N; 2400W 20Hz-20kHz, 0.1% THD+N
- 8 Ohms Bridged Mono Power: 3600W 1kHz, 0.03% THD+N; 3400 W 20Hz-20kHz, 0.1% THD+N
- 84Ohms Bridged Mono Power: 5000W 1kHz, 0.03% THD+N; 4800W W 20Hz-20kHz, 0.1% THD+N
- Max RMS Output Voltage (each channel): 99V
- Peak Output Voltage (each channel): 140V
- Frequency Response (+0 / -0.3dB, 1W/8 Ohms): 20Hz-20kHz, -3dB@150kHz
- Power Bandwidth (rated power at 4 Ohms, 1% THD+N): 20Hz-20kHz, -.2dB/+.2dB
- TourClass Protection: ACL, IGM, AutoRamp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input.
- THD+N (rated power at 4 Ohms, 1kHz): <0.03%
SMPTE IMD (rated power at 8 Ohms, 60Hz & 7kHz): <0.01%
Damping Factor (10-400Hz at 8 Ohms): 800:1 - Input CMRR (1kHz): > – 70dB
- Input Sensitivity (rated power at 8 Ohms ): .775V standard (switchable)
- Voltage Gain: X115 standard (switchable)
- Input Impedance (balanced/unbalanced): >20kohms/>10kohms
- Hum and Noise (“A” weighted, full power, 4 Ohms): -115dB
- Crosstalk (“A” weighted, full power, 4 Ohms)”: > – 80dB
- Class: H
- Input Connectors (per Channel): Female XLR (pin 2+, switchable for pin 3+), TRS (tip+)
- Input Connectors (per Channel): Speakon connectors or 2 pair of 5-way output binding posts
- Filter Storage: 144,000 mF
- Power Supply (factory configured): 100V-240V, 50-60Hz
- Idle Current Draw 120V: 3.0A
- 1/8 Power Current Draw (typical music, 120V/4 Ohms)12.0A
- 1/3 Power Current Draw (continuous music, 120V/4 Ohms): 25.0A
- Max Current Draw (circuit breaker rating, 120V/4 Ohms): 36.0A
- Thermal Emissions (1/8 Power, 4 Ohms): 7125 BTU/hr
- Thermal Emissions (1/3 Power, 4 Ohms): 9450 BTU/hr
- Cooling: Back-to-front via 2 rear panel mounted variable-speed DC fans
- (filters removable without tools)
- Controls: Front Panel: 2 attenuators; Rear Panel Switches: signal ground lift,
- mode select, gain select, XLR input pin 2/3 hot (+) Clip/Limit, Signal, Temp/DC, Active
- Construction: Steel chassis, 16 gauge. Double thickness in rack ear areas.
- Dimensions (W x H x D): 19″ x 5.25″ x 15″ (483 x 134 x 381 mm)
- Weight: 77 lbs. (35 kg)
Reviews
There are no reviews yet.